末日孤舰电视剧:请大家帮我翻译以下内容,谢谢了!

来源:百度文库 编辑:高考问答 时间:2024/04/28 17:41:38
1: Install the drivers from enclosed CD-ROM by running Setup(PC) or Install (Mac) before installing the hardware.
2: The manual for your hardware is on the enclosed CD-ROM.Now is a good time to copy it to your hard drives and install Acrobat Reader if needed.
3: Turn off your computer and open the case.
4: Touch any exposed metal surface inside the case so you don't damage your Echo3G PCI card with static electricity.
5: Unplug your computer.
6: Insert the Echo3G PCI card into any free PCI slot and screw the bracket into the case.
7: Close your computer and plug it back in.
8: Connect the Echo3G breakout cable to the rear of the Echo3G box.Also connect any audio,MIDI,r S/PDIF cables at this time.
9: Turn on your computer.On Windows,watch the drivers magically install themselves(they're already installed on the Mac.)On Windows XP,you will need to select"Install the software automatically".

: 安装司机从附上的CD-ROM 由跑Setup(PC) 或安装(雨 衣) 在安装硬件之前。2: 指南为你的硬件是在附上的CD-ROM.Now 是一好时候复制它对你的硬盘和安装杂技演员读者如果需要。3: 关闭你的计算机和打开这个案件。4: 接触任一被暴露的金属表面在 案件里面如此你don't 损伤你的Echo3G 可编程通信接口卡片与 静电。5: 拔去塞子你的计算机。6: 插入Echo3G 可编程通信接口 卡片入任一个自由可编程通信接口槽孔和拧紧托架入案件。7: 关 闭你的计算机和塞住它。8: 连接Echo3G 包围突破缆绳在Echo3G 后面box.Also 连接任一音像, MIDI, 此时的r S/PDIF 缆绳。9: 打开你的computer.On 窗口, 魔术观看司机安装 themselves(they're 已经安装在Mac.)On 窗口XP, 你自动地将 需要select"Install 软件

我很想给你翻译,但是中间有些涉及计算机的东西,偶不太懂,不好翻出来,你先给讲一下具体在操作什么,是在安装驱动器吗?金属表面的是什么东西?