高考问答闯关东山东菜馆拍摄地:自动化人员帮助翻译一段英文，是关于pl c的！！！
来源：百度文库 编辑：高考问答 时间：2024/05/02 06:17:15
请大家帮帮忙吧，这是毕业设计中的外文文献翻译。文章是有关plc如何控制机器的。
Robot movements can be altered by using different masks for different robot tasks. One method of loading or programming sequencers is with a "teach" mode. This is a technique for loading or setting up the on-off contacts in a sequencer to correspond with the on-off status of I/O points. For this method, a robot is jogged into a desired position. Pressing a "teach" pushbutton energizes a sequencer load instruction that causes the on-off status of all pertinent inputs to be copied into a sequencer step. By jogging the robot through steps sequentially, in each case pressing the "teach" pushbutton, a programmable logic controller ( PLCS ) is "taught" a sequence of movements.
Robot movements can be altered by using different masks for different robot tasks. One method of loading or programming sequencers is with a "teach" mode. This is a technique for loading or setting up the on-off contacts in a sequencer to correspond with the on-off status of I/O points. For this method, a robot is jogged into a desired position. Pressing a "teach" pushbutton energizes a sequencer load instruction that causes the on-off status of all pertinent inputs to be copied into a sequencer step. By jogging the robot through steps sequentially, in each case pressing the "teach" pushbutton, a programmable logic controller ( PLCS ) is "taught" a sequence of movements.
在哪里？
我来翻译
贴上来才能翻译