高考问答木头三角支撑架怎么做:才买半个月就经常死机.蓝屏.今天还花屏了（谁来帮下我）
来源：百度文库 编辑：高考问答 时间：2024/05/09 03:09:32
悬赏分：0 - 离问题结束还有 14 天 21 小时
我电脑才配半个月，就经常死机．．后来出显两3次蓝屏．上面很多英语看不懂．．．第2次蓝屏显示A problem has been detected and windows has been shut down to prevent damage to your computer
The damage seems to be caused by the following file:
If this the first time you 're seem this stop error screen appears again ,follow these steps:
check to make sure any new hardware or software is properly installed .
If this is a new installation , ask your hardware or software manufacturer
If problems continue disable or remove any newly installed hardware or software .Disable BIOS memory options such as caching or shadowing, If you need to use safemode to remove or disable compouents , ,restant select Advanced startup options ,and then select safe mode
Technical information:
***STOP:0x40000080(0x862D83E0,0x84E8A00.0x805511FC,0x00000001)
Beginning damp of phsical memory
phsical meomory damp complete Contact your system admimstautor or
technical support goup for futher assistance
现在玩魔兽3D游戏 ，出现花屏．．．请问下到底是那里的原因．． 我的电脑配置：CPU:Intel(R) Pentium(R) D cpu 2.8GHz RAM:1023 VGA: NVIDIA G73
1、没有打SP2或者SP1 补丁。XP本来就带有关机的一个BUG。
2、升级DX时把system下的部分重要文件覆盖安装了。
3、木马间谍病毒，也就是感染boot.ini文件的病毒。不过这种病毒也会影响蓝屏。 我感觉这种可能很大.
4、刷新BIOS不稳定。
5、内存条上的金手指上有灰尘或者氧化，通常会伴随一段英文蓝屏，解决方法似乎不用我说了吧:)
6、软件安装影响了某些系统驱动文件导致蓝屏，解决之道除了重新安装系统、系统还原（安全模式下）还向还没有什么能彻底解决问题的方法。尤其是某些杀毒软件在升级（下载完开始安装过程）中断电，也会引起蓝屏。
7、磁盘分区错误，用磁盘扫描工具扫描修复即可。
8、如果出现以下：A problem has been detected and windows has been shut down to prevent damage to your conputer.
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this Stop error screen,restart you computer.If this screen copears again, follow these steps:
Check to make sure any new hardware or software is properly installed.If this is a new installation,asd your hardware or software manufacturer for any windwos updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory option such as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select Safe Mode.
Technical Information
***STOP 0×0000009F(0×00000500,0×00000002,0×FF7A6F18,0×816A9BD0)
那么就要注意了，这很可能和你的硬盘数据线接触不良，内存条接触不好、甚至电源有些问题了，如果不是请尽快将硬盘中数据备份出来吧。
专家来拉.
1.你从新叉下显卡~~75%那的毛病~~~~~多试几次!要是不行就不好说了
解决方法,显卡拆下把金属片顺着擦擦....然后装上....试2遍,不性的话就拿去修,修不好再买个
显卡的问题`或是程序问题！