寒战1手机在线播放:急求一汇编动画程序

一个推箱子的动画游戏：
-----------------------
;本程序由国外的Vulture大哥编写，并公布了源码，这个是他95年的一个作品，可以说是在当时是非常成功的！

;这个程序是巧妙的利用了坐标的不断变化，从而实现了由星星构成的箱子3D转动！

;为了尊重版权，本人未对源码注释进行翻译，这样做也可以让国内的汇编爱好者自己琢磨国外的汇编编程的思维！

;编译方法： 1 tasm 3d.asm

; 2 tlink 3d.obj

; 3 exe2bin 3d.exe 3d.com

;本程序是站长精心收集的一个很经典的3D小动画. 站长的x86汇编小站：http://www.x86asm.com

; 永久域名：http://x86asm.yeah.net

;==============================================================================;
; ;
; Assembler Program By Vulture. ;
; 3D-system example. Use the following formulas to rotate a point: ;
; ;
; Rotate around x-axis ;
; YT = Y * COS(xang) - Z * SIN(xang) / 256 ;
; ZT = Y * SIN(xang) + Z * COS(xang) / 256 ;
; Y = YT ;
; Z = ZT ;
; ;
; Rotate around y-axis ;
; XT = X * COS(yang) - Z * SIN(yang) / 256 ;
; ZT = X * SIN(yang) + Z * COS(yang) / 256 ;
; X = XT ;
; Z = ZT ;
; ;
; Rotate around z-axis ;
; XT = X * COS(zang) - Y * SIN(zang) / 256 ;
; YT = X * SIN(zang) + Y * COS(zang) / 256 ;
; X = XT ;
; Y = YT ;
; ;
; Divide by 256 coz we have multiplyd our sin values with 256 too. ;
; This example isn't too fast right now but it'll work just fine. ;
; ;
; Current Date: 6-9-95 Vulture ;
; ;
;==============================================================================;

IDEAL ; Ideal mode
P386 ; Allow 80386 instructions
JUMPS ; Tasm handles out of range jumps (rulez!:))

SEGMENT CODE ; Code segment starts
ASSUME cs:code,ds:code ; Let cs and ds point to code segment

ORG 100h ; Make a .COM file

START: ; Main program

mov ax,0013h ; Init vga
int 10h

mov ax,cs
mov ds,ax ; ds points to codesegment
mov ax,0a000h
mov es,ax ; es points to vga

lea si,[Palette] ; Set palette
mov dx,3c8h
xor al,al
out dx,al
mov dx,3c9h
mov cx,189*3
repz outsb

; === Set some variables ===
mov [DeltaX],1 ; Initial speed of rotation
mov [DeltaY],1 ; Change this and watch what
mov [DeltaZ],1 ; happens. It's fun!

mov [Xoff],256
mov [Yoff],256 ; Used for calculating vga-pos
mov [Zoff],300 ; Distance from viewer

MainLoop:
call MainProgram ; Yep... do it all... ;-)

in al,60h ; Scan keyboard
cmp al,1 ; Test on ESCAPE
jne MainLoop ; Continue if not keypressed

; === Quit to DOS ===
mov ax,0003h ; Back to textmode
int 10h
lea dx,[Credits]
mov ah,9
int 21h
mov ax,4c00h ; Return control to DOS
int 21h ; Call DOS interrupt

; === Sub-routines ===

PROC WaitVrt ; Waits for vertical retrace to reduce "snow"
mov dx,3dah
Vrt:
in al,dx
test al,8
jnz Vrt ; Wait until Verticle Retrace starts
NoVrt:
in al,dx
test al,8
jz NoVrt ; Wait until Verticle Retrace ends
ret ; Return to main program
ENDP WaitVrt

PROC UpdateAngles
; Calculates new x,y,z angles
; to rotate around
mov ax,[XAngle] ; Load current angles
mov bx,[YAngle]
mov cx,[ZAngle]

add ax,[DeltaX] ; Add velocity
and ax,11111111b ; Range from 0..255
mov [XAngle],ax ; Update X
add bx,[DeltaY] ; Add velocity
and bx,11111111b ; Range from 0..255
mov [YAngle],bx ; Update Y
add cx,[DeltaZ] ; Add velocity
and cx,11111111b ; Range from 0..255
mov [ZAngle],cx ; Update Z
ret
ENDP UpdateAngles

PROC GetSinCos
; Needed : bx=angle (0..255)
; Returns: ax=Sin bx=Cos
push bx ; Save angle (use as pointer)
shl bx,1 ; Grab a word so bx=bx*2
mov ax,[SinCos + bx] ; Get sine
pop bx ; Restore pointer into bx
push ax ; Save sine on stack
add bx,64 ; Add 64 to get cosine
and bx,11111111b ; Range from 0..255
shl bx,1 ; *2 coz it's a word
mov ax,[SinCos + bx] ; Get cosine
mov bx,ax ; Save it bx=Cos
pop ax ; Restore ax=Sin
ret
ENDP GetSinCos

PROC SetRotation
; Set sine & cosine of x,y,z
mov bx,[XAngle] ; Grab angle
call GetSinCos ; Get the sine&cosine
mov [Xsin],ax ; Save sin
mov [Xcos],bx ; Save cos

mov bx,[Yangle]
call GetSinCos
mov [Ysin],ax
mov [Ycos],bx

mov bx,[Zangle]
call GetSinCos
mov [Zsin],ax
mov [Zcos],bx
ret
ENDP SetRotation

PROC RotatePoint ; Rotates the point around x,y,z
; Gets original x,y,z values
; This can be done elsewhere
movsx ax,[Cube+si] ; si = X (movsx coz of byte)
mov [X],ax
movsx ax,[Cube+si+1] ; si+1 = Y
mov [Y],ax
movsx ax,[Cube+si+2] ; si+2 = Z
mov [Z],ax

; Rotate around x-axis
; YT = Y * COS(xang) - Z * SIN(xang) / 256
; ZT = Y * SIN(xang) + Z * COS(xang) / 256
; Y = YT
; Z = ZT

mov ax,[Y]
mov bx,[XCos]
imul bx ; ax = Y * Cos(xang)
mov bp,ax
mov ax,[Z]
mov bx,[XSin]
imul bx ; ax = Z * Sin(xang)
sub bp,ax ; bp = Y * Cos(xang) - Z * Sin(xang)
sar bp,8 ; bp = Y * Cos(xang) - Z * Sin(xang) / 256
mov [Yt],bp

mov ax,[Y]
mov bx,[XSin]
imul bx ; ax = Y * Sin(xang)
mov bp,ax
mov ax,[Z]
mov bx,[XCos]
imul bx ; ax = Z * Cos(xang)
add bp,ax ; bp = Y * SIN(xang) + Z * COS(xang)
sar bp,8 ; bp = Y * SIN(xang) + Z * COS(xang) / 256
mov [Zt],bp

mov ax,[Yt] ; Switch values
mov [Y],ax
mov ax,[Zt]
mov [Z],ax

; Rotate around y-axis
; XT = X * COS(yang) - Z * SIN(yang) / 256
; ZT = X * SIN(yang) + Z * COS(yang) / 256
; X = XT
; Z = ZT

mov ax,[X]
mov bx,[YCos]
imul bx ; ax = X * Cos(yang)
mov bp,ax
mov ax,[Z]
mov bx,[YSin]
imul bx ; ax = Z * Sin(yang)
sub bp,ax ; bp = X * Cos(yang) - Z * Sin(yang)
sar bp,8 ; bp = X * Cos(yang) - Z * Sin(yang) / 256
mov [Xt],bp

mov ax,[X]
mov bx,[YSin]
imul bx ; ax = X * Sin(yang)
mov bp,ax
mov ax,[Z]
mov bx,[YCos]
imul bx ; ax = Z * Cos(yang)
add bp,ax ; bp = X * SIN(yang) + Z * COS(yang)
sar bp,8 ; bp = X * SIN(yang) + Z * COS(yang) / 256
mov [Zt],bp

mov ax,[Xt] ; Switch values
mov [X],ax
mov ax,[Zt]
mov [Z],ax

; Rotate around z-axis
; XT = X * COS(zang) - Y * SIN(zang) / 256
; YT = X * SIN(zang) + Y * COS(zang) / 256
; X = XT
; Y = YT

mov ax,[X]
mov bx,[ZCos]
imul bx ; ax = X * Cos(zang)
mov bp,ax
mov ax,[Y]
mov bx,[ZSin]
imul bx ; ax = Y * Sin(zang)
sub bp,ax ; bp = X * Cos(zang) - Y * Sin(zang)
sar bp,8 ; bp = X * Cos(zang) - Y * Sin(zang) / 256
mov [Xt],bp

mov ax,[X]
mov bx,[ZSin]
imul bx ; ax = X * Sin(zang)
mov bp,ax
mov ax,[Y]
mov bx,[ZCos]
imul bx ; ax = Y * Cos(zang)
add bp,ax ; bp = X * SIN(zang) + Y * COS(zang)
sar bp,8 ; bp = X * SIN(zang) + Y * COS(zang) / 256
mov [Yt],bp

mov ax,[Xt] ; Switch values
mov [X],ax
mov ax,[Yt]
mov [Y],ax

ret
ENDP RotatePoint

PROC ShowPoint
; Calculates screenposition and
; plots the point on the screen
mov ax,[Xoff] ; Xoff*X / Z+Zoff = screen x
mov bx,[X]
imul bx
mov bx,[Z]
add bx,[Zoff] ; Distance
idiv bx
add ax,[Mx] ; Center on screen
mov bp,ax

mov ax,[Yoff] ; Yoff*Y / Z+Zoff = screen y
mov bx,[Y]
imul bx
mov bx,[Z]
add bx,[Zoff] ; Distance
idiv bx
add ax,[My] ; Center on screen

mov bx,320
imul bx
add ax,bp ; ax = (y*320)+x
mov di,ax

mov ax,[Z] ; Get color from Z
add ax,100d ; (This piece of code could be improved)

mov [byte ptr es:di],al ; Place a dot with color al
mov [Erase+si],di ; Save position for erase
ret
ENDP ShowPoint

PROC MainProgram
call UpdateAngles ; Calculate new angles
call SetRotation ; Find sine & cosine of those angles

xor si,si ; First 3d-point
mov cx,MaxPoints
ShowLoop:
call RotatePoint ; Rotates the point using above formulas
call ShowPoint ; Shows the point
add si,3 ; Next 3d-point
loop ShowLoop

call WaitVrt ; Wait for retrace

xor si,si ; Starting with point 0
xor al,al ; Color = 0 = black
mov cx,MaxPoints
Deletion:
mov di,[Erase+si] ; di = vgapos old point
mov [byte ptr es:di],al ; Delete it
add si,3 ; Next point
loop Deletion
ret
ENDP MainProgram

; === DATA ===

Credits DB 13,10,"Code by Vulture / Outlaw Triad",13,10,"$"

Label SinCos Word ; 256 values
dw 0,6,13,19,25,31,38,44,50,56
dw 62,68,74,80,86,92,98,104,109,115
dw 121,126,132,137,142,147,152,157,162,167
dw 172,177,181,185,190,194,198,202,206,209
dw 213,216,220,223,226,229,231,234,237,239
dw 241,243,245,247,248,250,251,252,253,254
dw 255,255,256,256,256,256,256,255,255,254
dw 253,252,251,250,248,247,245,243,241,239
dw 237,234,231,229,226,223,220,216,213,209
dw 206,202,198,194,190,185,181,177,172,167
dw 162,157,152,147,142,137,132,126,121,115
dw 109,104,98,92,86,80,74,68,62,56
dw 50,44,38,31,25,19,13,6,0,-6
dw -13,-19,-25,-31,-38,-44,-50,-56,-62,-68
dw -74,-80,-86,-92,-98,-104,-109,-115,-121,-126
dw -132,-137,-142,-147,-152,-157,-162,-167,-172,-177
dw -181,-185,-190,-194,-198,-202,-206,-209,-213,-216
dw -220,-223,-226,-229,-231,-234,-237,-239,-241,-243
dw -245,-247,-248,-250,-251,-252,-253,-254,-255,-255
dw -256,-256,-256,-256,-256,-255,-255,-254,-253,-252
dw -251,-250,-248,-247,-245,-243,-241,-239,-237,-234
dw -231,-229,-226,-223,-220,-216,-213,-209,-206,-202
dw -198,-194,-190,-185,-181,-177,-172,-167,-162,-157
dw -152,-147,-142,-137,-132,-126,-121,-115,-109,-104
dw -98,-92,-86,-80,-74,-68,-62,-56,-50,-44
dw -38,-31,-25,-19,-13,-6

Label Cube Byte ; The 3d points
c = -35 ; 5x*5y*5z (=125) points
rept 5
b = -35
rept 5
a = -35
rept 5
db a,b,c
a = a + 20
endm
b = b + 20
endm
c = c + 20
endm

Label Palette Byte ; The palette to use
db 0,0,0 ; 63*3 gray-tint
d = 63
rept 63
db d,d,d
db d,d,d
db d,d,d
d = d - 1
endm

X DW ? ; X variable for formula
Y DW ?
Z DW ?

Xt DW ? ; Temporary variable for x
Yt DW ?
Zt DW ?

XAngle DW 0 ; Angle to rotate around x
YAngle DW 0
ZAngle DW 0

DeltaX DW ? ; Amound Xangle is increased each time
DeltaY DW ?
DeltaZ DW ?

Xoff DW ?
Yoff DW ?
Zoff DW ? ; Distance from viewer

XSin DW ? ; Sine and cosine of angle to rotate around
XCos DW ?
YSin DW ?
YCos DW ?
ZSin DW ?
ZCos DW ?

Mx DW 160 ; Middle of the screen
My DW 100

MaxPoints EQU 125 ; Number of 3d Points

Erase DW MaxPoints DUP (?) ; Array for deletion screenpoints

ENDS CODE ; End of codesegment
END START ; The definite end.... :)

; You may use this code in your own productions but
; give credit where credit is due. Only lamers steal
; code so try to create your own 3d-engine and use
; this code as an example.
; Thanx must go to Arno Brouwer and Ash for releasing
; example sources.
;
; Ciao dudoz,
;
; Vulture / Outlaw Triad